Languages

UHF RFID Module
HL7206D8 UHF RFID Module for 8 Ports RFID Reader
HL7206D8 is UHF RFID reader module board for developing 8-port fixed RFID reader. Based on Impinj R2000 chip platform, with 8 channels of SMA interfaces for RFID antennas,  it support multiple-tag and long range reading.
Solutions Enquiry Data sheet
Home Products RFID Module HL7206D8 UHF RFID Module for 8 Ports RFID Reader

Functions


Protocol: Support all mandatory commands of ISO18000-6C/6B

  • Work at fixed frequency or frequency hopping
Adjustable output power, step adjustment: 1dB Support polling work or specify the antenna work (two antenna ports)
  • Support RSSI: Perceptual signal strength
  • Support tag data filtering
  • Support anti-collision protocol

  • Support multi-label recognition

 

Technical parameter


  • Frequency:ETSI: 865MHz-868MHz, GB: 840MHz-845MHz, 920MHz~925MHz, FCC, 902MHz~928MHz

  • RF Port Output Power:30dBm±1dB(MAX)
  • Work mode: fixed frequency or frequency hopping
  • Forward modulation:DSB-ASK
  • Continuous reading distance (EPC code): 0-10 meters, read 100 times contiously, reading success rate > 95% (no interference environment). Test conditions: 8dBi linear polarization antenna, RF connection cable insertion loss less than 1dB, standard label (sensitivity better than-18dBm)

  • Continuous write label distance: 0 ~ 5 meters (Depends on label chip performance), continuous write 100 times, write the success rate >90%. Test conditions: 8dBi linear polarization antenna, RF connection cable insertion loss less than 1dB, standard label (sensitivity better than-18dBm)

  • Card reading speed: >400 times / second
  • Electrical Specifications

    Voltage

    3.7V~5V

    Working temperature

    20~55

    Storage temperature

    40~85

    Working humidity

    95%(﹢25℃)

    Protocol

    ISO 18000-6C/E1G2 ISO 18000-6B

    Working Frequency

    840MHz~960MHz

    Area Supported

    US, Canada and other regions following U.S. FCC

    Europe and other regions following ETSI EN 302 208 with & without LBT regulations

    Mainland China

    Japan

    Korea

    Malaysia

    Taiwan

    Output Power

    0~30dBm

    Output power accuracy

    ±1dB

    Receiving sensitivity

    -80dBm

    Tag RSSI

    Supported

    Antenna connection protection

    Supported

    Communication Interface

    TTL UART Interface

    GPIO

    2 port input, 2 port output (3.3 Electric Level)

    Highest communication baud rate

    115200bps

    Cooling method

    External heat sink air-cooled

    Inquiry Now:


    深圳市鸿陆技术有限公司(原科陆物联)


    Shenzhen Hopeland Technologies CO., Ltd.


     Hopeland Office     CONTACT DETAILS

           Head office: Clou Buliding, Baoshen Road, Hi-tech Park 

          North, Nanshan District, 518057, Shenzhen, China


          Production Center: Clou Industrial Park, Cross between 

          Baolong 1st Road and Qingfeng Road, Baolong Industrial 

          Town, Longgang district, Shenzhen, P.R.China


          Tel: +86 755 36901035

          Fax: +86 755 36901035

          Email: inquiry@hopelandRFID.com

    Contact Us

    Copyright © 2019 Shenzhen Hopeland Technologies CO., Ltd. All Rights Reserved. Powered by dyyseo.com

    welcome to hopeland
    If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

    Home

    Products

    about

    contact

    Service Online

    If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!