Languages

HL7202G-5 Smart Android RFID Tablet Handheld PDA Online
HL7202G-5 Smart Android RFID Tablet Handheld PDA
HL7202G-5 is Hopeland new designed handheld RFID tablet PDA, which based on Android system. The product support RFID, NFC, UHF RFID and barcode reading fucntions, with 4G, WiFi, Bluetooth, GPS communication.
Solutions Enquiry Data sheet
Home Products Handheld Terminal HL7202G-5 Smart Android RFID Tablet Handheld PDA
RFID tablet

Introduction


The data acquisition, operation and maintenance field operation terminal is the new handheld terminal product independently researched and developed by Hopeland Technologies. This product is feature-rich, supports Android operating system, integrates advanced technologies such as National Grid authorized security unit, power infrared, laser infrared, 4G network, GPS Beidou dual mode, Bluetooth, WIFI, barcode scanning, RFID, and secure access to the State Grid. System acquisition system master station, supporting special peripherals (collecting operation and maintenance fault identification module, measurement failure identification module, UHF RFID module, Bluetooth printer), etc., to achieve automatic synchronization of electronic work orders, online orders, automatic feedback, independent verification , Paperless office, at the same time using GIS to achieve personnel positioning, equipment positioning, in accordance with operating instructions for operation, on-site fault diagnosis, on-site deficiencies, reduce the use of technical threshold requirements, improve work efficiency.

Specifications


Basic configuration

CPU

ARM Cotex-A53Octa-Core

Frequency 1.5GHz

OS

Android 5.1

Memory

RAM 2GB/3GB

ROM 16GB/32GB

Extendable: max 128GB TF card

Touch screen, display

Size5.5 inch

Resolution: 1280*720

160 wide sight, high light available

Multi-touch capacitive screen.

Keyboard

Shortcut key (scan/infrared/flashlight key); menu key; return key; confirmation key; power key

4G/3G/2G

4GTD-LTE, FDD-LTEWCDMAEVDO(CDMA2000)GSMCDMA

4G TDD-LTE :   1900/2300/2500/2600   MHz(B38/B39/B40/B41)

4G FDD-LTE :   1800/2100/2600   MHz (B1/B3/B7) 

3G TD-SCDMA: 1900/2100     MHZ (B34/B39)

3G WCDMA:850/900/1900/2100   MHz(B1/B2/B5/B8)

2G GSM:850/900/1800/1900   MHz(B2/B3/B5/B8)

CDMA&EVDO: 800 MHz(BC0)

Wi-Fi

IEEE 802.11 b/g/n/a 2.4G/5G

Bluetooth

Support Bluetooth V2.1+EDR/V3.0+HS/4.1

Range> 10m

Support Bluetooth printer. communication

Camera

12m pixelAuto-focusing with flash

Flashlight

Supportable

Location

GPSAGPSBig Dipper, Positioning longitude less than 10 meters, cold start time less than 40 seconds, hot start time less than 3 seconds

Sound and light and vibration tips

With voice prompts

With power instructions and work instructions

With vibration tips

Gravity sensor

Supportable

Electronic compass

Supportable

Light sensor

Supportable

Proximity sensor

Supportable

                  Audio

support MIC, handset, speaker

Data collection function

Barcode scanning

Professional scanning engine module, supports one-dimensional barcode and two-dimensional code scanning at the same time

Reading mode: One-dimensional laser scanning, two-dimensional CMOS camera

Reading depth of field: 45mm to 450mm

Resolution:EM2027640×480,EM2027M752×480    

2DPDF417.QR Code(Model 1/2)DataMatri×(ECC200.ECC000,050

          080.100.140),Aztec,MAXiccde.

1Dde128.EAN-13,EAN-8,Code39,UPC-A,UPC-E,Codaba,

          China post 25,interteaved 2 of 5,ISBN/ISSN.Code93

NFC/RFID

RF work frequency is 13.56MHz

Transport protocol supports ISO14443A protocol or ISO15693 protocol

UHF RFID

Customizable ISO18000-6C for projects

RS485

Conforms to RS485 interface standard; interface is compatible with EIA/TIA RS232/RS485 standard, and has anti-attack performance when connected with other devices; transmission rate meets 300bps~115200bps; maximum support in 32 node 485 bus network; RS485 communication interface resistance Interference performance meets the requirements of DL/T614-2007

Modulation infrared communication

Meet the infrared requirements in DL/T645-1997 and DL/T645-2007 standards

Infrared laser communication

Infrared laser emitting tube has a wavelength of 980nm and an error range of 965nm to 995nm

The carrier demodulation center frequency of the infrared receiver is 38kHz

Red laser wavelength is 650nm

The distance between the center point of the red spot and the center spot of the laser infrared spot is no more than 1.5cm at 1m, no more than 2cm at 3m, and no more than 3cm at 5m

Security unit

For secure decryption, supportable

ESAM

Supportable

Physical interface

SIM

SIM card ×1

TF

Micro SD×1

Support TF card expansion, compatible with secure encryption card of State Grid Corporation's secure access platform

Meet the requirements of the national password authority product certification

USB OTG

Micro USB×1

Support USB2.0 standard

Support device charging function

Expand Functions

RS485

Via USB

RS232

Via USB

Field strength detection

Supportable via Bluetooth

Serial inspection

Supportable via Bluetooth

Station identification

Supportable via Bluetooth

Micropower wireless

Supportable via Bluetooth

On-site verification

Supportable via Bluetooth

SIM card detection

Supportable via Bluetooth

Carrier detection

Supportable via Bluetooth

UHF RFID

Supportable via Bluetooth

Bluetooth printer

Supportable via Bluetooth

Software

OS

Android 5.1

Input

Support Chinese and English switching, support handwriting, keyboard input mode.

SDK

Provide secondary development documents for handheld devices, provide related (scan, infrared, etc.) drivers, SDK

Performance

operating hours

Standby time greater than 72 hours, continuous working time greater than 8 hours

temperature

Working temperature: -30°C+70°C

humidity

Storage temperature: -40°C+80°C

Electromagnetic Compatibility

5%-95% (non-condensing)

Waterproof and dust-proof

Comply with relevant national standards

Fall protection

IP65

Accessories

Battery

Can withstand a drop of 1.2 meters

Power Adapter

Removable rechargeable battery, battery capacity 5000mAh/3.7V

Communication Cable

Work more than 8 hours; support USB charging;


深圳市鸿陆技术有限公司(原科陆物联)


Shenzhen Hopeland Technologies CO., Ltd.


 Hopeland Office     CONTACT DETAILS

       Head office: Clou Buliding, Baoshen Road, Hi-tech Park 

      North, Nanshan District, 518057, Shenzhen, China


      Production Center: Clou Industrial Park, Cross between 

      Baolong 1st Road and Qingfeng Road, Baolong Industrial 

      Town, Longgang district, Shenzhen, P.R.China


      Tel: +86 755 36901035

      Fax: +86 755 36901035

      Email: inquiry@hopelandRFID.com

Contact Us

Copyright © 2018 Shenzhen Hopeland Technologies CO., Ltd. All Rights Reserved. Powered by dyyseo.com

welcome to hopeland
If you have questions or suggestions, please leave us a message,we will reply you as soon as we can!

Home

Products

about

contact